The machine can automatically detect the thickness of glass and identify LOW-E glass.Automatic thickness detecting system can adjust the space between upper roller and lower roller of washing section,the brushes can be automatically shifted when LOW-E glass is identified.This machine adopts PLC control system,and can control blower running in a state of energy saving.Hot water tank can be equipped in cold region.If features fine cleanness of glass and low noise.The upper section can be freely lifted and descended for easy maintenance.

Model No.	ZTWC-20	ZTWC-22	ZTWC-25	ZTWC-30
Max. Glass Size(mm)	2000×3600	2200×3600	2500×6000	3000×6000
Min. Glass Size(mm)	350× 420	350×420	350×420	350×420
Glass Thickness(mm）	3~19	3~19	3~25	3~25
Washing Speed(m/min)	0.5~4	0.5~4	0.5~4	0.5~4
Installed Power(Kw)	23	25	29	38

Technical Details of Horizontal Glass Washing & Drying Machine:

1. Aluminum alloy assembled structure, high efficiency, and energy-saving.
2. PLC + touch screen system control, the operation interface is simple and easy to understand, fast glass thickness automatic adjustment, the machine built-in one key start function, with wiring is the best configuration to reduce manpower.
3. All paint coatings are spray painted,
4. The conveying rubber roller of the whole machine is made of vulcanized rubber (it is forbidden to contact acid liquid) with rubber rod diameter of 76mm.
5. The upper segment is equipped with stainless steel water plate, high-pressure spray system, and the spray pipe adopts fast connection, which is convenient for disassembly and cleaning.
6. The size of the upper stage is 1800mm, the size of cleaning and air drying section is 2600mm, and the size of the lower stage is 1800mm.
7. The cleaning part, cleaning area, and air drying area rise and fall as a whole. The maximum lift is 300 mm, which is convenient for cleaning and maintenance.
8. The lifting structure adopts linear axis, which makes the lifting more stable and greatly improves the dimensional accuracy
9. The cleaning section consists of three pairs of brushes（ φ One soft brush can clean Low-E glass and coated glass, and the hard brush of upper cleaning part is equipped with air cylinder, which can be lifted independently. When cleaning Low-E glass, the hard brush can be lifted, and its speed is the best design.
10. Three pairs of special aluminum wind blades with strong wind force, two straight and one inclined design, can remove water droplets on the plane of thick plate glass tail better.
11. The whole fan box is installed on the upper part of the equipment, and the air inlet chamber of the high-pressure fan is equipped with an air filter, which is convenient for inspection and cleaning.
12. The main drive is helical gear drive. The conveying and lifting are variable frequency speed regulations. Two motor independent toothed belt groups separately drive the brush, the speed is stable, and the service life is long.
13. The water tank of the cleaning machine is an external water tank with bottom drainage, which is convenient for cleaning, changing water and checking, to make the cleaning effect of the cleaning machine better.
14. Height of worktable: (900) ± 20 mm
The sheet metal of the water contact part is made of stainless steel.
15. Working power supply: 380V / 50Hz
16. Power is 25kw.
17. Water source: self circulation, tap water (in line with the standard of people’s water).
18. Minimum machinable glass 300x500mm
19. Maximum glass size 2000/2200×3660, 2500/3000x6000mm
20. Maximum glass thickness 3-21mm